192.168.1.3 special IP addresses router login admin. 192.168.l.3 is a special IP address, sometimes used in local networks. Home networks, especially those who have a Linksys broadband router, use this address with people in the range starting with 192.168.1.1. A router can automatically assign 192.168.1.3 to any device on the local network, or an administrator can do it manually.
Note: There is nothing special about this IP address. Your router randomly assigns.
192.168.1.3 Is IP Automatic Assigned?
Computers and other devices that support the Dynamic Host Configuration Protocol (DHCP) receive their IP addresses automatically from a router. The router decides which address to search from the set interval to manage.
When the router is installed with a network range of between 192.168.1.1 and 192.168.1.255, it receives a single address for itself – usually 192.168.1.1 – and keeps the rest in a repository. Normally, the router has these guaranteed addresses, 192.168.1.2, then 192.168.1.3 and so on. Starting with, respectively, throws in order.
Manual Assignment of 192.168.1.3
Computers, game consoles, phones, and most other modern network devices allow manual setting of an IP address. However, simply entering your IP number does not guarantee the device can use it. The local network router must also be configured to include 192.168.1.3 in its address range.
192.168.1.3 Connection Problems
Most networks dynamically assign private IP addresses using DHCP. Attempting to assign 192.168.1.3 to a device manually in a so-called “fixed” or “static” address assignment is not recommended in home networks due to the risk of IP address mismatch. Many home network routers have 192.168.1.3 in DHCP pools by default and do not check if the IP address is assigned to a client manually before requesting it automatically. In the worst case, 192.168.1.3 has been assigned to two different devices on the network – one is manual and the other is automatically assigned, and the connection to both devices has failed.
If a dynamically assigned device with IP address 192.168.1.3 is kept separate from the local network for a sufficiently long period, a different address can be assigned. The time period referred to as a lease period at DHCP varies depending on your network configuration, but is usually two or three days. Even after the DHCP lease expires, it is likely that the device will continue to receive the same address at the next entry to the network, unless the rent for other devices has expired.
Finding Router IP Address
Windows 7, 8, 8.1 and 10, press Win + C, search > “cmd ” > Enter to open the command line. At the command prompt, type “ipconfig” and press Enter. You will see the IP address of your router at the bottom of the network you are currently connected to “Default Gateway” router IP address.
Briefly: Go to the search bar, select “run” and type in “cmd” and once the command box opens type “ipconfig/all.