192.168.1.254 – 192.168.l.254 router login admin information. 192.168.1.254 is an IP address used by the routers of certain models to identify themselves on the network.
One of the addresses in the “private network 16-bit block address space” allocated for use in private networks. This address space consists of 65,536 addresses that are proven to be too much for small home networks. Typical home or small business network uses only a subset of it, and for most router networks it allocates a range of 192.168.1.0 – 192.168.1.255 IP address. 192.168.1.255 is reserved for broadcast data transfers (sending data to all computers on the network). Therefore, 192.168.1.254 is the last available address in the range.
192.168.1.0 is reserved for defining the network and cannot be used. Therefore, if your router uses 192.168.1.254 as an IP address, you still have 253 addresses that you can use (192.168.1.1 – 192.168.1. … ) . The following router brands benefit from 192.168.1.254:
- Certain models of Linksys Routers/Modems
- Alcatel Routers
- Westell DSL Routers
- 3Com Routers/3Com Routers
- Billion Routers/Billion Routers
- Netopia Cayman Gateways
If you are trying to configure your modem or router, you need to make sure you know the IP address. The administrative interface for the modem / router is only available via this IP address.
Default User Name and Password
Most routers with an IP address of 192.168.1.254 use admin for the user name and admin as the password. Alcatel and Thomson modems use the Administrator as a user name and are blank as a password. OvisLink modems use a user name as the administrator and airlive as a password.
>>> All Router Default Password List <<<
Finding Router IP Address
Windows 7, 8, 8.1 and 10, press Win + C, search > “cmd ” > Enter to open the command line. At the command prompt, type “ipconfig” and press Enter. You will see the IP address of your router at the bottom of the network you are currently connected to “Default Gateway” router IP address.
Briefly: Go to the search bar, select “run” and type in “cmd” and once the command box opens type “ipconfig/all.